bell notificationshomepageloginedit profileclubsdmBox

10.02% popularity   0 Reactions

I prefer to use a dry microfiber cloth to clean my touchscreen, but sometimes you have to scrub pretty hard to remove fingerprints. Is it safe to use a cleaner on the screen or should I use only water (or perhaps stick to dry cloth)?


Free books android app tbrJar TBR JAR Read Free books online gutenberg


Load Full (2)

Login to follow story

More posts by @Marsha

2 Comments

Sorted by latest first Latest Oldest Best

10% popularity   0 Reactions

The first thing you should always do is look in your devices manual if there is a recommended way of cleaning (or doing anything else). It is probably the best way to avoid problems with your warranty (in case something goes wrong).
If you don't have your PRS-650 manual any more you can find it (googling sony prs 650 support) on-line on the Manual, Specs and Warranty tab.
There you find the PDF version of the user manual. On page 114 it says:

On cleaning

Clean the Reader with a soft cloth, such as a cleaning cloth for eyeglasses.
If the Reader becomes very dirty, clean it with a soft cloth slightly moistened with
water or a mild detergent solution.
Do not use any type of abrasive pad, scouring powder, or solvent, such as alcohol
or benzene, as it may mar the finish of the case.
Clean the headphone plug periodically.
Tapping or dragging on the touch screen using a dirty stylus may damage the surface. Wipe the stylus with a dry cloth when it gets dirty.


Free books android app tbrJar TBR JAR Read Free books online gutenberg


Load Full (0)

 

@Karl

10% popularity   0 Reactions

After a little research, I came across this post. It details two different ways to clean eReader screens. One for E-Ink screens and one for LCD screens.

The Coles notes version for E-Ink screens:

Use a dry cloth or dampen a cloth with water (microfiber preferred).
Do not apply water directly.
Carefully wipe screen with cloth and allow to dry before using.

The Coles notes version for LCD screens:

Microfiber cloth
LCD solution or mix (50-50) isopropyl alcohol and distilled water (not tap water!)
Moisten cloth, wipe and dry before use.

So one recommends water and one recommends against water. PRS-650 is a touch screen, but is E-Ink display. So which way is better? It turns out the PRS-650 does not have a special layer on top of the E-Ink display like it's predecessor (it uses light sources firing over the surface to tell when there is something touching it, or just over it). More info here. So this leads me to believe it should be treated like an E-Ink display and cleaned accordingly.


Free books android app tbrJar TBR JAR Read Free books online gutenberg


Load Full (0)

 

Back to top